Getting Ready for NanDesuKan 3

Alright, so Sunday and yesterday I finished fixing, cleaning all the frames (and painted some). Now I just have to buy some masking tape so that I can affix some of the artwork (the one’s that don’t have glass) and also covering the back side with paper. Some of the frames also need a hanging attachment. It should be easy to do, but I will have to go and buy these parts. Tomorrow.

I am missing one frame, the Adventure Time piece. I had to repaint it, so it will be absent from the photos presented.

For the Wind Rises piece I had to actually cut the top and bottom parts of the paper to make it fit. This was a good chance to bring out my cutting mat! It’s been a while since I bought it, and just now I had an excuse to take it out of it’s packaging.

Although this frame did not have glass, this is my favorite. I really feel it fit the Totoro drawing.

Hasta la próxima,

-Nube

CHANCE!

August 30, 2016 0

Getting Ready for NanDesuKan 2

This post will be a bit short in that I will only be showcasing the artwork and frames I will be taking and using.

You will notice that I am showing the Adventure time piece twice, that’s because I decide to trade the frame with another piece (the one shown at the end). This photos only show they artwork and frames, I’m still not finished positioning and framing them in the photos shown below (so please keep that in mind).

So these are the pieces and frames I will be using. Some of them I decided to just clean up and use as they are, while others I decided to paint up. For a couple of them I also had to create some backing paper so they looked a bit more presentable. I will show the end results tomorrow. It took me almost all day to finish them all, but I did it. (•̀o•́)ง

I will talk a bit more on my thought on the next post.

Hasta la próxima,

-Nube

CHANCE!

August 28, 2016 0

Getting Ready for NanDesuKan 1

So as I said in my last post, I will be taking some artwork to a local anime convention. One of the first steps I had to do first was choose the pieces of art I will be taking. Having decided to wait until I had a good amount of pieces I could showcase to the public I noticed my first hurdle, there are far too many to take… This meant I had to decide which ones to take this time around and which ones to leave behind.

Now, I was told that I would be provided enough space for all the artwork I decided to take, but I don’t wan’t to take too much space and monopolize the room! One other thing I need to keep in mind is frames. Rules state that they have to hang and can’t just be stuck to the wall (though I really wouldn’t do that in the first place). The most cost effective way to do it is to make my own frames. Wood would be to expensive and would cost almost as much as buying them new, so I did think of using paper frames. Although that wouldn’t be such a bad idea, I had two spare frames given to me. After seeing them framed I couldn’t help but like they way they looked, so I decided to frame them all.

This meant that I would have to buy some frames, a task that can get extremely expensive. So I did the only option I had, and that is to go to the thrift store. Luckily every Saturday they have sales which would really lighten the burden of the expenses. When I arrived it quickly became apparent that it would be so easy. I had to scavenge through the piles of frames out on display. I had to make sure they were the right size, or at the very least close to it. This took quite a while and two thrift stores. When I arrive home I found out that one of them was defective and broken (even though it was packaged in its original box and looks new) and another one was a great frame but would accommodate the pieces I currently have.

One thing to note is that I did have to cut a couple of pieces off from the original line up I had originally decided to take. After much thought I decided upon 16 pieces well 18 if I count the Keyblades, which thinking about it now is already a big number… I wonder if I will really be ok taking all this pieces? Only one way to find out I guess.

Choosing the pieces to take, check. Buying them frames, check. And I already went ahead and chose which artwork went with what frame. These were the hardest parts, but they are now finished. The next step is to clean them up, paint some of them and get them ready and packaged so that they are easy to move around.

Hasta la próxima,

-Nube

CHANCE!

August 27, 2016 0

Big News! (((o(ﾟ▽ﾟ)o)))

So… because I was so focused on working with the Youtube video and the Traditional X Digital I kinda forgot that just how close the local anime convention NanDesuKan was. To my surprise the convention is only a little less than two weeks away. Now that wouldn’t be too big a deal concerning the amount of time I can dedicate to new work. But an amazing opportunity became available this year! But more on this a bit further down, first let me give a little background.

I started going to NanDesuKan when I got out of high school. One thing that I look forward to the most (well along with looking at the cosplayers) is the Artist Alley where artist come together and sell prints of their work. I have seen some amazing artwork and dreamed of joining the same stage at some point. But I knew that my skills had a ways to go till I was worthy of showcasing my work. But I soon found out that not only did I have to worry about my skills but I also had to take into account that they have a raffle system to get a table. On top of that, past artist also have a chance to continue getting a table on the subsequent years. So really in the end getting a table will be solely based on luck. Now, once I do get a table I can be voted to come again the next year. Which is why I feel that having a high level of skill was of utmost importance.

Funnily enough now that I felt I had created a good number of artwork that could be sold, well I was too late to apply to get a spot. So for that reason I had no choice but sit this year out (assuming I would even get a spot).

As if by luck or fate I found out that I also had a chance to sell my art in the Art Show. The difference between the Art Show and the Artist Alley is that the Artist Alley is all about selling prints and duplicates of goods. The Art Show on the other hand is all about selling the original physical artwork. This includes drawings, paintings, statues, etc. So in essence this works to my strengths since I prefer to do traditional art work. On top of that, most of the artist go to the Artist Alley instead since they tend to focus on digital artwork. This means that not that many people submit artwork leaving spaces open. So all of that sounds good right?

Well, it gets even better… The system for showcasing artwork in the Art Show is done by just showing up with one’s artwork the first day and securing a spot. So as long as I get there early enough I get a chance to showcase and sell my art! On top of all that, after contacting them to clarify some of my concerns, I also learned that I really won’t have any real restrictions in how many art pieces I can submit. In the last years there was a limitation of using a 4×4 foot panel to hang artwork. But now that has been done away with and they will provide even more space if needed! Just thinking about it…

For that reason I will be focusing on getting things ready. I want to make some special frames for a couple of art pieces and I only have a little less than two weeks so I will be using all my time and focus on that. There are a couple of things that will also keep me busier on top of getting ready for the Art Show. School has started this week, so my schedule will be completely packed. Hmm.. I don’t want to keep neglecting this page though, so I will do my best to give updates on the work I have prior to the convention and during it.

This will be a great step for the Artist Project! If I can make this work…

“hhfffuuuu” σ(≧ε≦ｏ)

I will call these opportunites:

CHANCE!

Hasta la próxima,

-Nube

August 23, 2016 0

New Opening and Ending for the Channel

So I have been out for a bit, well only a couple of days. But fear not, I was actually working on some more work for the Artist Project. I had mentioned before that I wanted to start uploading videos up again to Youtube, but I also wanted to do new content as well. The first thing I wanted to do though was to create a new Opening and Ending for the channel. But I wanted some more interesting visuals than what I usually had by using the easy to use effects given in programs like Windows Movie Maker and the very basics of what I knew from Sony Vegas Pro. This meant that I had to sit down and actually learn some new techniques.

It sounds easy to say, but one of the reasons I wasn’t able to do it before was because I had too much information pop up. This wouldn’t be a problem if I wanted to learn from the very beginning, but since I had something specific I wanted to do I just felt like it would take too much time to get to the part I was interested in learning. Having said that, after playing around with Vegas for a couple of months now I have gotten used to the basics on my own. So once I had an idea of what I wanted to do, I just went and searched for that very thing. Thanks to this new Opening and Ending, I learned a lot of amazing things I can do with a program like Sony Vegas. Along the way I also learned a lot more techniques so that I can fully utilize Photoshop. This was a very insightful project.

I will probably make a post of the process I took to make this video in the near future, so please look forward to that.

Here is what I was working on:

This will be the new Opening and Ending for my videos. For any of you Jackie Chan fans out there, you will notice that I am paying homage to his earlier films of the 80s and 90s. Background is from the beautiful artwork from Oboro Muramasa. I couldn’t find any clean backgrounds, which sucked. But this pretty much forced me to learn some new techniques in Photoshop, so I am thankful for that. It took some time but I managed to clean them up and leave nothing but the background intact.

I took a bit of time to get to learn how to use Sony Vegas Pro and Photoshop to make this video possible. Now that I have this done I can once again start working on some new artwork and finally start uploading some Youtube videos.

There will be a couple of tweaks I will make to this intro and ending, but overall it is the finished product.

Hasta la próxima,

-Nube

August 15, 2016 0

Actual Lelouch final

So after taking a small break from the Lelouch drawing I decided to go at it again to make a couple of little tweaks. But before that, here is how the drawing looks without the original drawing:

It looks really funny.

But any way here is the actual final piece:

I just eased the blood lighting, darkened some areas especially on Lelouch and I also added the Geass. I don’t really want to spend too much time on this so I will leave it as is. This was a good test of what is possible.

Hasta la proxima,

-XERO

August 9, 2016 1

Traditional X Digital (Color) IV II Final

It, took longer than I expected…

I really thought I would have been able to finish this one quite easily, but in the end as usual it took quite some time to go about modifying areas over and over as I went along. Luckily that doesn’t surprise me anymore and can work on that as I go along. Color theory is still a bit of a pain, but I feel like I am getting the hang of it. The great thing about coloring digitally is that I can make as many mistakes as I want and I can always go back and fix it. On top of that I don’t have to redo my whole work either, I can just change the hue of the layer and modify it so that it fits with the overall picture.

This one was quite technical. Digital art isn’t as straightforward as traditional (although traditional is harder and requires quite a bit of thinking beforehand, in essence it requires a lot of skill and concentration). With that in mind I made sure to use every technique I have picked up so far using digital color to acquire a good image. It is still lacking compared to the pro digital artist, but I feel like I have gotten one step closer. This image had numerous layers that allowed me to get the feel and effects I was imagining.

There is one revelation that became quite clear as I was working on this piece though, and it’s a really important one. Coloring pencil artwork might not be such a great idea. It’s quite tough when they actually have a background. Because there is only so much one can do to smooth things out and have as little areas that aren’t uniformly shaded, this create areas that are very… rough, uneven, grainy, etc. These defects get passed on to the digital artwork. And although I can probably use this to my advantage in some artwork, it won’t work for most of it. For this piece I spent quite a bit of time just trying to downplay the amount of grainyness from the pencil shading that gave it a “dirty” look when colored. This is quite disappointing…

Of course I have thought of other ways to use these same shadings to my advantage on some future projects, but as explained before, it won’t work with everything. It seems that this technique will work best with simple drawings with no background, but will work even better with using artwork that only focuses on the outlines for me to color in digitally.

Hmmm…. I do have one more drawing I wan’t to try coloring though, it is also done with pencil but this one is done on a much higher quality paper that I managed to pour all of my skills onto (well, at least at the time). So I wan’t to see just how big the difference is.

In any case I do want to finally show what I managed to make. Don’t know if I want to add it to the gallery though… What do you guys think? (for now here is the final piece, I’ll upload pictures showing the process tomorrow on this same post. It’s quite late right now and I really want to take a break and rest for a bit):

Here are some pictures of the process, will add the “whole” process later in video form (something new I want to try out):

So from where we left off last time, here I went over it and shaded the drawing a bit closer to bring out more details. Doing that had some collateral damage though, now there are even more rips on the paper.

And as expected the longer I worked on it the worse the rips became, it was really annoying but luckily I have some experience dealing with rips.

Rips fixed! I went ahead and started repairing it digitally using the clone tool which took me quite some time to understand… make sure to right click the area you want to clone as you hold the Alt button if you which to copy the right area instead of struggling to find out why the clone tool is painting something you don’t want. In the end I found that the best tool for the job was the healing brush tool since it blended in the area according to the surroundings. Of course it also had it’s quirks so you have to pay attention and do small areas as you go, but it’s quite easy to use and made repairing the rips quite easy.

From here I just started to add color using the method mentioned on my other posts of Traditional X Digital.

I did the best that I could digitally on this one. I have a ways to go, but I feel it look much better than it would have looked had I tried this even just a month ago. I’m no longer afraid of digital, I’ll make sure to understand it more as I continue to polish my skills in all areas!

That is all for now (Aside from adding that video I mentioned above).

Hasta la proxima,

-XERO

August 6, 2016 1

Traditional X Digital (Color) IV

Here is the next project for the Traditional X Digital series. This one is different in that it is a somewhat recent piece. I had it originally as a rough draft, but I guess at some point I forgot that and added way too many details to it. It was also originally going to be a drawing that I would make for a Youtube video as a request. But if I remember correctly I ended up drawing a simpler drawing with no background for that. I wonder if the requester even saw that video…

In any case, as I was working on some other work, I remembered I had this piece that just needed a couple of detailing and shading to bring it back to live so that I could color it digitally. This was specially important because the sketchbook I use is a really cheap one that has very sensitive paper. Since I only make rough drafts on it I don’t mind, but since it does contain this one piece that I don’t feel like redrawing since it looks quite good and has a lot of detail, I decided to just finish shading and polishing this piece.

Despite taking some care, as expected I did end up creating some rips all around the drawing. Which kinda sucks, but I should be able to revive it digitally. For now i should just focus on shading and finishing this piece. Since this one actually is an original piece I should be able to put it on my gallery (assuming it comes out great). So please look forward to that.

Here are some scans:

If you look around the drawing you should be able to see the rips I sadly made on the paper as I was working on it.

Well, that’s it for today. I will keep working on it, and hopefully will be done soon.

Hasta la proxima,

-XERO

August 2, 2016 0

A little change of plans regarding the Youtube video

I have had an idea for my Youtube videos for quite some time, and instead of just postponing it till later I will just do it. I’d say I am at a level that I can now do work that I will be happy with and that won’t take incredibly long times to make. So I will just go for it. Keeping that in mind, it will probably take a bit to get it ready and done. So I will keep working on my other artwork and projects so that I don’t leave this website without updates again. I really want to keep this place as alive as I can.

For this coming week I will try to work on and upload some new artwork and also some of the Digital x Traditional coloring updates. Please look forward to that.

Hasta la proxima,

-XERO

August 1, 2016 0